Tuv print icon 打印本页 Tuv share icon 分享 Tuv contact mail icon 联系我们
Tuv check icon

感谢您的留言。
我们将尽快回复您。

联系德国莱茵TÜV

Sorry. This action failed due to a technical error. Please try again later.

请填写所有带*号的必填项。

请尽可能准确地描述您的要求。
我们将尽快与您联系。
  • The requested ID page is also available in the following languages: Chinese Simplified, German

    Certified Product

    • Product

      Photovoltaic modules: see below

    • Certificate Holder

      AVANCIS GmbH

    • Test Mark Number

      1111236458

    The test entails:

    1. IEC 61215

      The IEC 61215, respectively EN 61215, comprises the examination of all parameters which are responsible for the ageing of PV modules and describes the various qualification tests on the basis of the artificial load of the materials. In particular one differs between the following load groups:

      Sunlight incl. UV
      Climate (changing of climates, coldness, warmth, humidity)
      Mechanical load (hail, wind suction, wind pressure, snow)

      The tests are judged to be passed, if after the qualification tests no major visual defects are detected and the output power has not or only slightly degraded from its initial value.

      The qualification certificate corresponding to IEC 61215 has gained acceptance in the past few years as the quality symbol for crystalline PV modules. Nowadays such a certificate is required for most national and international funding programs.
      Tuv info icon
    2. IEC 61730

      The standard IEC 61730 comprises the requirements for the design and the testing of PV modules regarding the qualification for the safe electrical and mechanical operation throughout their expected lifetime. The test sequences of the IEC 61730 are designed such that they can co-ordinate with those of the IEC 61215 (PV modules - design qualification and type approval) and the test samples may be used for the performance as well as for the safety qualification. Among the test categories are:

      Environmental stress

      Besides the basic tests, the standard foresees additional tests that depend on the module end-use applications, which are categorized in classes A, B and C.

      The tests are judged to be passed, if the test applied would not result into potential electric shock, fire and personal injury.

      The IEC 61730 comprises all tests that are required for the determination of the protection class according to IEC 61140.

      Tuv info icon
    3. Regular Production Surveillance

      In order to ensure that products initially tested and certified by TÜV Rheinland continue to be produced in consistent quality, the production is inspected at regular intervals. The procedures in the production premises are inspected, such as the purchasing of components (supplier assessment), the individual processing stages and pre-delivery inspections. The use of the keyword "Regular Production Surveillance" confirms that the production has been subjected to such inspections.

      Tuv info icon

    Certification

    Product "Photovoltaic modules, PowerMax xxx (xxx [W]= 140 - 160 in steps of 5)" as named in the certificate was tested by TÜV Rheinland Energy GmbH and fulfills the defined requirements.

    Certificate for this Product

    Information

    Contact to the certificate holder

    AVANCIS GmbH

    Solarstr. 3
    04860 Torgau
    德国