Tuv print icon Imprimir página Tuv share icon Compartir página Tuv contact mail icon Contacto
Tuv check icon

Gracias por su mensaje.
Nos pondremos en contacto con Usted en breve.

Contactar con TÜV Rheinland

Lo sentimos. Esta acción ha fallado debido a un error técnico. Por favor, inténtelo de nuevo más tarde.

Rellene todos los campos indicados con *.

Describa su solicitud de la forma más explícita posible.
Le contestaremos lo más pronto posible.
La página ID solicitada también está disponible en los siguientes idiomas: German

Productos certificados

  • Producto

    Photovoltaic modules: see below

  • Certificado Titular

    AVANCIS GmbH

  • Número de logotipo

    1111236457

Resumen de Ensayos:

  1. IEC 61215

    The IEC 61215, respectively EN 61215, comprises the examination of all parameters which are responsible for the ageing of PV modules and describes the various qualification tests on the basis of the artificial load of the materials. In particular one differs between the following load groups:

    Sunlight incl. UV
    Climate (changing of climates, coldness, warmth, humidity)
    Mechanical load (hail, wind suction, wind pressure, snow)

    The tests are judged to be passed, if after the qualification tests no major visual defects are detected and the output power has not or only slightly degraded from its initial value.

    The qualification certificate corresponding to IEC 61215 has gained acceptance in the past few years as the quality symbol for crystalline PV modules. Nowadays such a certificate is required for most national and international funding programs.
    Tuv info icon
  2. IEC 61730

    The standard IEC 61730 comprises the requirements for the design and the testing of PV modules regarding the qualification for the safe electrical and mechanical operation throughout their expected lifetime. The test sequences of the IEC 61730 are designed such that they can co-ordinate with those of the IEC 61215 (PV modules - design qualification and type approval) and the test samples may be used for the performance as well as for the safety qualification. Among the test categories are:

    Environmental stress

    Besides the basic tests, the standard foresees additional tests that depend on the module end-use applications, which are categorized in classes A, B and C.

    The tests are judged to be passed, if the test applied would not result into potential electric shock, fire and personal injury.

    The IEC 61730 comprises all tests that are required for the determination of the protection class according to IEC 61140.

    Tuv info icon
  3. Regular Production Surveillance

    In order to ensure that products initially tested and certified by TÜV Rheinland continue to be produced in consistent quality, the production is inspected at regular intervals. The procedures in the production premises are inspected, such as the purchasing of components (supplier assessment), the individual processing stages and pre-delivery inspections. The use of the keyword "Regular Production Surveillance" confirms that the production has been subjected to such inspections.

    Tuv info icon

Certificación

Producto "Photovoltaic modules, SKALA xxx (xxx [W]= 120 - 145 in steps of 5)" con el nombre en el certificado fue probado por TÜV Rheinland Energy GmbH y cumple con los requisitos definidos.

Certificado para este producto

Información

Contacto con el titular del certificado

AVANCIS GmbH

Solarstr. 3
04860 Torgau
Alemania