La página ID solicitada también está disponible en los siguientes idiomas: German

Productos certificados

Photovoltaic modules: see below

Certificado Titular: Saatvik Green Energy (P) Limited

Número de logotipo: 1111220566

Producto "Photovoltaic modules, SGExxx-72P, SGExxx-72PB SGExxx-60P, SGExxx-60PB with 6“ poly cells (xxx = 300-330 in steps of 1, 72 cells) (xxx = 250-270 in steps of 1, 60 cells) SGExxx-54P, SGExxx-54PB (xxx = 220-240 in steps of 1, 54 cells) SGExxx-48P, SGExxx-48 PB (xxx = 200-215 in steps of 1, 48 cells) xxx represent output power in Wp SGExxx-72M, SGExxx-72MB SGExxx-60M, SGExxx-60MB with 6“ mono cells (xxx = 340-370 in steps of 1, 72 cells) (xxx = 280-310 in steps of 1, 60 cells) SGExxx-54M, SGExxx-54MB (xxx = 250-270 in steps of 1, 54 cells) SGExxx-48M, SGExxx-48MB (xxx = 230-240 in steps of 1, 48 cells) xxx represent output power in Wp SGExxx-36P, SGExxx-36 PB with 6“ poly cells (xxx = 150-160 in steps of 1, 36 cells) with 6“ poly cut cells SGExxx-36P(xxx = 10-125 in steps of 1, 36 cells) SGExx-18P(xx = 04-06 in steps of 1, 18 cells) with 6“ mono cells SGExxx-36M, SGExxx-36MB (xxx = 170-180 in steps of 1, 36 cells) with polycrystalline solar cells: SGExxx-72P (xxx = 300-340 in steps of 1, 72 cells) with monocrystalline solar cells: SGExxx-72M (xxx = 340-400 in steps of 1, 72 cells) xxx represent output power in Wp" con el nombre en el certificado fue probado por TÜV Rheinland Energy GmbH y cumple con los requisitos definidos.
Descripción:

The Photovoltaic (PV) modules of Saatik Green Energy (P) Limited, were tested by TÜV Rheinland Energy GmbH according to the following standards:

IEC 61215-1:2016 / EN 61215-1: 2016:Terrestrial photovoltaic (PV) modules
- Design qualification and type approval - Part 1: Test requirements

IEC 61215-1-1:2016 / EN 61215-1-1:2016: Terrestrial photovoltaic (PV) modules
- Design qualification and type approval - Part 1-1: Special requirements
for testing of crystalline silicon photovoltaic (PV) modules

IEC 61215-2:2016 / EN 61215-2:2017: Terrestrial photovoltaic (PV) modules
- Design qualification and type approval - Part 2: Test procedures

IEC 61730-1:2016 / EN 61730-1:2018: Photovoltaic (PV) module safety qualification
- Part 1: Requirements for construction

IEC 61730-2:2016 / EN 61730-2:2018: Photovoltaic (PV) module safety qualification
- Part 2: Requirements for testing

The test procedure comprises two major aspects:

1) Sample testing:
The accredited laboratory of TÜV Rheinland runs product tests on selected test samples to verify that these samples fulfil the requirements of the relevant standards.

The testing includes among other features:

  • Hail test
  • UV-exposure test 
  • Damp-heat test
  • Mechanical load test 
  • Hot-spot endurance test
  • Cut susceptibility test  
  • Humidity-freeze test
  • Module breakage test

2) Periodic inspection:
TÜV Rheinland experts perform periodic quality and production control at the manufacturing site(s) to ensure that all produced PV modules are manufactured with the same materials, using the same processes and at the same quality level as the laboratory tested samples.
 
Further information on the test criteria and procedures can be found under Certified Properties next to the test mark on this page.

Más informaciones del dueño del certificado sobre el producto certificado: The certificate holder has not provided further information about the certified product.
Contact to the certificate holder: Saatvik Green Energy (P) Limited

Village Dubli, Tehsil Barara
133101 District Ambala, Haryana
India (la)