The requested ID page is also available in the following languages: German

Certified Product

Photovoltaic modules: see below

Certificate Holder: SUNSTYLE INTERNATIONAL SAS

Test Mark Number: 1111220041

Product "Photovoltaic modules, SUNSTYLE M115 (output power 114W +/- 6W) with 6" mono cells SUNSTYLE M75 (output power 73W +/- 8W) SUNSTYLE M90 (colour: Terracotta, power 90W +/- 8W) SUNSTYLE M65 (colour: Bleu Marine, power 65.5 W +/- 8W) with 6" mono cells SUNSTYLE M90 (colour: Silver, power 90W +/- 8W) with 6" mono cells SUNSTYLE M58 (colour: Bleu Marine,, power 58W +/- 8W)" as named in the certificate was tested by TÜV Rheinland Energy GmbH and fulfills the defined requirements.
Description:

The Photovoltaic (PV) modules of SUNSTYLE INTERNATIONAL SAS, were tested by TÜV Rheinland Energy GmbH according to the following standards:

IEC 61215-1:2016 / EN 61215-1: 2016:Terrestrial photovoltaic (PV) modules
- Design qualification and type approval - Part 1: Test requirements

IEC 61215-1-1:2016 / EN 61215-1-1:2016: Terrestrial photovoltaic (PV) modules
- Design qualification and type approval - Part 1-1: Special requirements
for testing of crystalline silicon photovoltaic (PV) modules

IEC 61215-2:2016 / EN 61215-2:2017: Terrestrial photovoltaic (PV) modules
- Design qualification and type approval - Part 2: Test procedures

IEC 61730-1:2016 / EN 61730-1:2018: Photovoltaic (PV) module safety qualification
- Part 1: Requirements for construction

IEC 61730-2:2016 / EN 61730-2:2018: Photovoltaic (PV) module safety qualification
- Part 2: Requirements for testing

The test procedure comprises two major aspects:

1) Sample testing:
The accredited laboratory of TÜV Rheinland runs product tests on selected test samples to verify that these samples fulfil the requirements of the relevant standards.

The testing includes among other features:

  • Hail test
  • UV-exposure test 
  • Damp-heat test
  • Mechanical load test 
  • Hot-spot endurance test
  • Cut susceptibility test  
  • Humidity-freeze test
  • Module breakage test

2) Periodic inspection:
TÜV Rheinland experts perform periodic quality and production control at the manufacturing site(s) to ensure that all produced PV modules are manufactured with the same materials, using the same processes and at the same quality level as the laboratory tested samples.
 
Further information on the test criteria and procedures can be found under Certified Properties next to the test mark on this page.

Further information by the certificate holder about the certified product: The certificate holder has not provided further information about the certified product.
All certificates of SUNSTYLE INTERNATIONAL SAS:

3 certificates for products

Contact to the certificate holder: SUNSTYLE INTERNATIONAL SAS

140 Avenue des Champs-Élysées
75008 Paris
France