The requested ID page is also available in the following languages: German

Certified Product

PV Module: siehe unten " with 6" mono-crystalline cells PS-M72-xxx (xxx = 300 - 345 in steps of 5, 72 cells) PS-M54-xxx (xxx = 230 - 260 in steps of 5, 54 cells) PS-M60-xxx (xxx = 250 - 290 in steps of 5, 60 cells) xxx represent output power in Wp PS-M36-xxx (xxx = 150 - 170 in steps of 5, 36 cells)" and others

Certificate Holder: Philadelphia Solar Ltd. Co. Al Qastal Industrial Area 2

Test Mark Number: 1111209111

Product "PV Module, with 6" mono-crystalline cells PS-M72-xxx (xxx = 300 - 345 in steps of 5, 72 cells) PS-M54-xxx (xxx = 230 - 260 in steps of 5, 54 cells) PS-M60-xxx (xxx = 250 - 290 in steps of 5, 60 cells) xxx represent output power in Wp PS-M36-xxx (xxx = 150 - 170 in steps of 5, 36 cells) with 6" poly cells: PS-P72-xxx (xxx = 300 - 330 in steps of 5, 72 cells) PS-P54-xxx (xxx = 210 - 245 in steps of 5, 54 cells) PS-P60-xxx (xxx = 250 - 275 in steps of 5, 60 cells) xxx represent output power in Wp PS-P36-xxx (xxx = 150 - 165 in steps of 5, 36 cells) with 6" mono cells: PS-M72-xxx (xxx = 300 - 395 in steps of 5, 72 cells) PS-M54-xxx (xxx = 230 - 295 in steps of 5, 54 cells) PS-M60-xxx (xxx = 250 - 325 in steps of 5, 60 cells) xxx represent output power in Wp PS-M36-xxx (xxx = 150 - 195 in steps of 5, 36 cells) with 6" mono cells PS-M72-xxxW (AMMAN) (xxx=300-395 in steps of 5, 72cells) PS-M54-xxxW (IRBID) (xxx=230-295 in steps of 5, 54cells) PS-M60-xxxW (JARASH) (xxx=250-325 in steps of 5, 60cells) with 6" poly cells PS-M36-xxxW (MADABA) (xxx=150-195 in steps of 5, 36cells) PS-P60-xxxW (MAFRAQ) (xxx=250-275 in steps of 5, 60cells) PS-P72-xxxW (AQABA) (xxx=300-330 in steps of 5, 72cells) PS-P36-xxxW (AJLOUN) (xxx=150-165 in steps of 5, 36cells) xxx represent output power in Wp as listed on page 2 to 4" as named in the certificate was tested by TÜV Rheinland Energy GmbH and fulfills the defined requirements.
Description:

The Photovoltaic (PV) modules of Philadelphia Solar Ltd. Co. were tested by TÜV Rheinland Energy GmbH according to the following standards:

Crystalline silicon terrestrial photovoltaic (PV) modules – Design qualification and type approval
IEC 61215:2005, EN 61215:2005

Photovoltaic (PV) module safety qualification
Part 1: Requirements for construction
IEC 61730:2004+A1:2011+A2:2013, EN 61730:2007+A1:2012+A2:2013+A11:2014
Part 2: Requirements for testing
IEC 61730:2004+A1:2011, EN 61730:2007+A1:2012

The test procedure comprises two major aspects:

1) Sample testing:
The accredited laboratory of TÜV Rheinland runs product tests on selected test samples to verify that these samples fulfil the requirements of the relevant standards.

The testing includes among other features:

  • Hail test
  • UV-exposure test
  • Damp-heat test
  • Mechanical load test
  • Hot-spot endurance test
  • Cut susceptibility test
  • Humidity-freeze test
  • Module breakage test

The mechanical load test of EN/IEC 61215:2005 was performed with a load of 5400 Pa.

2) Periodic inspection:
TÜV Rheinland experts perform periodic quality and production control at the manufacturing site(s) to ensure that all produced PV modules are manufactured with the same materials, using the same processes and at the same quality level as the laboratory tested samples.
 
Further information on the test criteria and procedures can be found under Certified Properties next to the test mark on this page.

Further information by the certificate holder about the certified product: The certificate holder has not provided further information about the certified product.
All certificates of Philadelphia Solar Ltd. Co. Al Qastal Industrial Area 2:

4 certificates for products

Contact to the certificate holder: Philadelphia Solar Ltd. Co.
Al Qastal Industrial Area 2
Airfreight Road
11814 Amman
Jordan