The requested ID page is also available in the following languages: German

Certified Product

Solar Simulator System: "h.a.l.m. cetisPV-Moduletest3 with cetisPV-Therm-package-M"

Certificate Holder: h.a.l.m. elektronik gmbh

Test Mark Number: 0000079040

The test entails:

Description:

The turn-key pulsed solar simulator system
„h.a.l.m. cetisPV-Moduletest3 with cetisPV-Therm-package-M“
was tested by TÜV Rheinland Energy GmbH.
The system was found to comply with Class A+/A+/A+ requirements of IEC 60904-9:2020 (Edition 3).

Class A+ requirements are met for

  • Spectral match
  • Non-uniformity of irradiance
  • Short-term temporal instability STI
  • Long-term temporal instability LTI

for the following settings:

  • Test area up to 208 cm x 144 cm
  • Irradiance range 100 W/m² to 1200 W/m² (tested using a c-Si solar cell).

This irradiance range is covered by changing the electrical power output of the simulator control unit and by applying a Neutral Density Filter as an attenuator.

Non-uniformity Class A+ can only be ensured if uniformity is measured and if necessary adjusted after changing a flash tube.

 

Further information by the certificate holder about the certified product: The certificate holder has not provided further information about the certified product.
Contact to the certificate holder: h.a.l.m. elektronik gmbh

Friesstraße 20
60388 Frankfurt
Germany