The requested ID page is also available in the following languages: German

Certified Product

Emission measurement: "E-MD 5100"

Certificate Holder: Horiba GmbH

Test Mark Number: 0000037054


The EM-D 5100 is a dust measuring system for continuous emission monitoring
requiring official permission (i.e. waste incineration, large combustion plants…).
The attenuation of the measuring light beam due to the dust concentration is measured. 

The certified components and ranges are:

Component      CR     SR 1     SR 2     SR 3     Unit
dust 0 - 0,1 0,2 0,5 1,6   Ext.
  0 -   100%       Opaz.

CR = certification range
SR = supplementary range

The range 0,1 Ext. correspond to 15 mg/m³ dust with 5m length of light path

The measurement system was tested by TÜV Rheinland Energie und Umwelt GmbH
in accordance with the European Standards EN 15267 Part 1, 2 and 3 and
is QAL1 certified according to EN 14181.

The measuring equipment is published by the German Umweltbundesamt
(Federal Environment Protection Agency) as being suitability tested.

More information:

Further information by the certificate holder about the certified product: The certificate holder has not provided further information about the certified product.
All certificates of Horiba GmbH:

3 certificates for products

Contact to the certificate holder: Horiba GmbH

Kaplanstrasse 5
A-3430 Tulln