The requested ID page is also available in the following languages: German

Certified Product

Emission Measurement: "PG 350E"

Certificate Holder: HORIBA, Ltd.

Test Mark Number: 0000032301


The measurement system PG 350E is a multi component analyser system
for continuous emission monitoring requiring official permission
(i.e. waste incineration, large combustion plants…).
The analyser use for NOx Chemilumescence, for O2 paramagnetism
and for CO, SO2 and CO2 NDIR. 

The certified components and ranges are:

Component          CR     SR 1     SR 2     Unit
CO 0 - 75 1250 -   mg/m³
NOx 0 - 2051) 20502) -   mg/m³
SO2 0 - 143 1430 -   mg/m³
O2 0 - 25 10 -   Vol.-%
CO2 0 - 20 - -   Vol.-%

CR = certification range
SR = supplementary range

1) as NO2, this corresponds to apx. 0 - 134 mg/m³ NO
2) as NO2, this corresponds to apx. 0 - 1340 mg/m³ NO

The measurement system was tested by TÜV Rheinland Energie und Umwelt GmbH
in accordance with the European Standards EN 15267 Part 1, 2 and 3 and is QAL1 certified according to EN 14181.

The measuring equipment is published by the German Umweltbundesamt
(Federal Environment Protection Agency) as being suitability tested.

More information:

Further information by the certificate holder about the certified product: The certificate holder has not provided further information about the certified product.
All certificates of HORIBA, Ltd.:

5 certificates for products

Contact to the certificate holder: HORIBA, Ltd.

2 Miyanohigashi, Kisshoin Kyoto
610-8510 Minami-ku