|Type of Certificate
|EC Type-Examination Certificate (Machinery Directive)
|Baumer Hübner GmbH
|Sensors, Transmitters, Guards > for Motion and Position
|Absolute Encoder with safety SinCos-Interface
|AK8Y / AK8W / AMG77 S
|Codes and Standards
|Safe measurement of rotational direction, standstill, speed, acceleration, and relative position at rotary machines. The encoders comply with the requirements of the relevant standards (Cat. 3 / PL d acc. to
EN ISO 13849-1, SIL 2 / SIL CL 2 acc. to EN 61800-5-2 / IEC 61508 /
IEC 62061) and can be used in applications up to these safety levels in conjunction with an appropriate upstream device (safety PLC or safety drive controller) which provides signal monitoring and diagnostic coverage.
|The instructions of the associated Installation and Operating Manual shall be considered. A power cycle of the device once a year is mandatory. The user is always obliged to perform a risk analysis and to check whether the device can be used in the specific application.
Remark: In case of missing entries this is due to restrictions by the certificate holder