|Type of Certificate||A-FS&CS Certificate|
|Certificate Holder||BERZICO INTERNATIONAL|
|Product Category||Actuators > Valve-Positioners / Controllers|
|Type Designation||BSY series pneumatic actuators BSYab-xxxxyy-cde / BSYab-xxxxyy-cdz
BR series pneumatic actuators BRaxxxx / BRaxxxx-byy
(For detailled information see test report)
|Codes and Standards||
|Scope and Result||Safety Function: On demand, the complete pneumatic actuator assembly actuate a valve into a safety position. The safety position of the actuator can correspond to either “closed” or “open”.
The assessment based on the certification program of the Certification Body came to the result that the actuators are suitable for use in a safety instrumented system up to
SIL 2 (low demand mode). Under consideration of the minimum required hardware fault tolerance HFT = 1 the actuators may be used in a redundant architecture up to SIL 3.
|Specific Provisions||The instructions of the associated Installation, Operating and Safety Manual shall be considered.|
|Certificate/Reg.-No.||Certificate Holder||Product Category||Product Tested||Type Designation||Details|
Remark: In case of missing entries this is due to restrictions by the certificate holder