|Type of Certificate||A-FS&CS Certificate|
|Certificate Holder||Endress + Hauser Flowtec AG|
|Manufacturer||Endress + Hauser Flowtec AG|
|Product Category||Sensors, Transmitters, Guards > for Flow Rate|
|Subject||Meter for the safe measurement of volume flow|
|Type Designation||Promag 200
with the IO-Modul "IO211 Ex-i, 212 Ex-d" (Option A, B)
|Codes and Standards||
|Scope and Result||The measurement device complies with the requirements of the relevant standards (HW Safety Integrity SIL 2 and Systematic Safety Integrity SIL 3 acc. to IEC 61508) for the safety function measurement of volume flow rate at current output 1 (4-20mA). It can be used in applications up to SIL 2 (HFT=0) resp. SIL 3 (HFT=1) acc. to IEC 61508.
In high demand mode and HFT=0 architecture the safe use of the device is limited to a demand rate of the safety function ≤ 1/50 h. Details see backside of certificate.
|Specific Provisions||The instructions of the associated Installation and Operating Manual shall be considered.|
|Certificate/Reg.-No.||Certificate Holder||Product Category||Product Tested||Type Designation||Details|
Remark: In case of missing entries this is due to restrictions by the certificate holder