|Type of Certificate||EC Type-Examination Certificate (Machinery Directive)|
|Certificate Holder||C.O.B.O. S.p.A.|
|Product Category||Logic Units > Compact Controllers|
|Product Tested||Programmable safety board for machinery applications|
|Codes and Standards||
|Intended Application||Safety-related and non-safety-related functions in machinery applications.
The safety-related parts of the board meet the requirements for PL d / Cat. 2 of EN ISO 13849-1 and SIL 2 of IEC 62061/IEC 61508.
|Specific Requirements||The instructions of the associated Product Specification and Safety Manual shall be considered.
The board contains safety and non-safety-related parts. The following non-safety-related I/Os may not be used in safety-related functions: High speed inputs, Analog outputs, Lin Bus, RS 232.
When the CAN bus is used in safety functions, additional diagnostic measures shall be implemented in the application SW (see Safety Manual).
The SW function blocks for application SW and the platform to develop application SW were not part of the assessment and may not be used in safety functions without an additional safety assessment.
|Valid Until||2019-06-24 (Certificate expired)|
|Certificate/Reg.-No.||Certificate Holder||Product Category||Product Tested||Type Designation||Details|
Remark: In case of missing entries this is due to restrictions by the certificate holder