Certificate No. J 01 220/K-4045655-Z

Certificate Holder: Nippon Tansan Gas Co., Ltd.

4956-2 Ienaka, Tsuga-machi,
Tochigi-shi, Tochigi 328-0111
Certificate Number: J 01 220/K-4045655-Z
Certified Product: Transportbehälter / CO2 Gas cylinder

Model Designation:
1 - Type: 10cc 3/8-UNF-1; Inner Capacity [cc]: min. 10.1; Ø [mm]: 18.7±0.3
2 - Type: 14cc 3/8-UNF-1; Inner Capacity [cc]: min. 13.9; Ø [mm]: 18.7±0.3
3 - Type: 20cc 3/8-UNF-1; Inner Capacity [cc]: min. 19.8; Ø [mm]: 21.8±0.3

4 - Type: 23cc 3/8-UNF-1; Inner Capacity [cc]: min. 22.8; Ø [mm]: 21.8±0.3

5 - Type: 28cc 1/2-UNF-1; Inner Capacity [cc]: min. 28; Ø [mm]: 25.4±0.3
6 - Type: 30cc 1/2-UNF-1; Inner Capacity [cc]: min. 30; Ø [mm]: 25.4±0.3
7 - Type: 35cc 1/2-UNF-1; Inner Capacity [cc]: min. 35; Ø [mm]: 25.4±0.3
8 - Type: 44cc 1/2-UNF-1; Inner Capacity [cc]: min. 44.4; Ø [mm]: 25.4±0.3
9 - Type: 44cc M12-1; Inner Capacity [cc]: min. 44.4; Ø [mm]: 25.4±0.3
10 - Type: 50cc 1/2-UNF-1; Inner Capacity [cc]: min. 51.4; Ø [mm]: 30.0±0.3
11 - Type: 60cc 1/2-UNF-1; Inner Capacity [cc]: min. 61.5; Ø [mm]: 30.0±0.3
12 - Type: 60cc M12-1; Inner Capacity [cc]: min. 61.5; Ø [mm]: 30.0±0.3
13 - Type: 78cc 1/2-UNF-1; Inner Capacity [cc]: min. 78; Ø [mm]: 30.0±0.3
14 - Type: 83cc 1/2-UNF-1; Inner Capacity [cc]: min. 83; Ø [mm]: 30.0±0.3
15 - Type: 95cc 1/2-UNF-1; Inner Capacity [cc]: min. 95.5; Ø [mm]: 40.0±0.4


Valid until February 7, 2019

Fulfilled Standards: EN ISO 12402-7:2006/A1:2011

The standard(s) listed here reflect the status at the time of the release of this certificate.
Date of Issue: January 30, 2017
Certificate Type: Certificate of Surveyed Conformity

Certificate of Surveyed Conformity (J-Mark)

The certificate of surveyed conformity refers to the product specified in the certificate.

The tested products are usually individual parts or components, such as parts of a manufacturing chain, in contrast to ready-to-use finished products.

The certificate serves as evidence that a product sample has been tested and evaluated, and that the essential safety requirements of the product, with the exceptions as stipulated on the certificate, have been fulfilled.

Testing and certification are voluntary. TÜV Rheinland tests a product sample and inspects the product’s manufacture at regular intervals.

The certificate remains valid unless the standard(s) expire or the client or TÜV Rheinland cancels the certificate. The certificate becomes invalid if the product is altered.

Certified products may be labeled with a test mark.